Remodeling projects are inevitably messy. Even if the contractor you hired was meticulous about keeping the work area clean, you will need to do a cleaning after remodeling. That’s because construction dust and debris, can get into every nook and cranny of your home. So you need a post-construction cleaning.
Why Is Post Remodeling Deep Cleaning So Important?
After all of the hard work that goes into a remodel, it’s necessary to clean up so you can appreciate your new space and start living in it. Remodeling projects generate dust and grime, especially when walls are broken open or relocated. A thorough cleaning is required for both health and comfort reasons.
While you can just clean up the apparent debris, remodeling projects leave behind harmful toxins and chemicals. Even the cleanest-looking homes may be hiding dangerous contaminants. Therefore, so it’s important to give your home a thorough cleanse, to know what you’re getting into. And what you will need before you start clean after remodeling.
The air quality in your home is directly linked to your overall health. If you’ve recently renovated your home, or are planning a major construction project, it’s important to understand the risks of poor indoor air quality. From childhood asthma to cancer-causing toxins, contaminated homes can lead to a long list of health problems for homeowners and their families. Deep cleaning after remodeling is an essential step to ensure a healthy home environment for you and your family.
Post Remodeling Cleaning Checklist
It’s finally done! The home remodels over, and you can settle back into a routine. But you may notice a significant amount of dust, dirt, and debris that has accumulated during the work. How do you clean the house after remodeling? Keep reading for a post-remodeling cleaning checklist that will help you get it all done.
Protect the Area to be Remodeled
Before starting the deep clean after remodeling, make sure that your newly renovated home is prepared for it. Tape off the work area with plastic sheeting or drop cloths to keep dust and debris confined. Cover vents with plastic and tape down all seams. Remove furniture from rooms that are to be remodeled and cover those that cannot be moved with plastic sheeting or drop cloths.
Spread heavy plastic over the floor in hallways and other areas adjoining the work area and seal under the doors with duct tape. Move things away from walls if possible, so that dust has a lesser chance to settle on them. If you have drapes and blinds, remove them and place them in garbage bags to protect them until you’re done with the cleaning.
Vacuum, Vacuum, Vacuum!
Remodeling projects can create quite a mess. This includes dust, dirt, and other debris that often spreads throughout the house as most of it can’t be contained. Start by cleaning all the surfaces that have been used for remodeling. Use a vacuum to get rid of any dust from the surface. You can opt for an electronic duster to clean surfaces that are hard to reach using a vacuum cleaner. Make sure to use duster pads that do not leave any residue behind, as it can make cleaning harder later on.
But don’t stop with the floor. You can also use the vacuum’s hose attachment to vacuum your drapes and chairs, especially if they are leather. You can even vacuum upholstered furniture and mattresses.
Ensure that you use a vacuum cleaner with a HEPA filter since it can suck most of the dirt and dust. It will also clear up the mold spores and chemicals left behind by the paint and other materials used in the remodeling process.
Time for Damp Cleaning
Damp clean the home after remodeling by dusting fixtures and windows and trimming with a damp cloth. Clean dirty walls with a cleaning solution and rinse them thoroughly with water. Clean woodwork, such as baseboards, door frames, and window sills, with a cleaning solution (made specifically for wood) and wipe them dry.
Dampen your cloth using a mixture of dish washing liquid and warm water. Make sure the cloth is wet but not dripping. Use the cloth to dust all light fixtures, including fans and chandeliers. Wipe down all exposed plumbing pipes in the bathroom or kitchen, as well as any metal switches or outlets, with a dry duster. If there is a broken pipe or faulty wiring in your home, then stay away from those areas until an electrician can come and fix the problem for you. If you are not a pro, you should not attempt to fix the problem yourself because it could result in electrocution or other serious injuries.
Wipe down any glass surfaces in the house, such as windows and mirrors. If there are smudges that won’t wipe off with a damp cloth, use a good-quality window cleaner. Wipe any metal surfaces clean with a damp cloth. This includes door hinges and doorknobs, as well as cabinet handles throughout the home. Thoroughly wiping down everything is crucial in a post modeling cleanup.
Clean Air Vents & Filters
Remodeling projects can cause dust and particles to contaminate your HVAC system, so it’s important to start by cleaning the air vents first. Just vacuum them out using a long-handled upholstery brush or use a vent register brush that has a long handle and soft bristles. Don’t forget to clean out the registers on the vent covers themselves as well as inside the duct-work if you’re able to access it. You should also remove and clean the filters in your heating or cooling system.
The first step in cleaning your filter is to remove it from the vent. Turn off your appliance before you remove the filter from the unit. Tap each side of the filter on a hard surface to dislodge dirt, and then vacuum any remaining residue.
Next, use soap and water to wash off any debris that may have accumulated on the filter. Once dry, put the filter back into its proper place within the air vent so there is no obstruction for airflow within your home!
One of the most important things to do after a remodel is to make sure all of your filters are replaced, and most importantly, clean. This includes everything from furnace filters to refrigerator filters and more. Depending on how long the remodel took, you can expect these to be covered in dust and dirt. That could cause minor and major issues for you. Replacing these will help ensure you have clean air in your home again as soon as possible.
Five tips for a Spotless Cleanup After Remodeling
Cleaning your home after remodeling is a challenging task. Right from the dust to the stains, the cleaning process needs you to follow certain tips and tricks. Here are some tips for deep cleaning your home after remodeling.
1. Cleaning up the Mess
Once you are done with the remodeling process, you get to see a lot of debris and heaps of waste in your house. It is best advised that you hire a dumpster rental service, where they will remove all the garbage from your place.
2. Carpets in the End
Save carpet cleaning until last if possible. The dust will settle on carpets, even if there are plastic sheets over them. You must wait until everything else is done before vacuuming or having your carpets cleaned professionally.
3. Wipe the Windows
This is your chance to give your windows a thorough cleaning inside and out. If your windows were covered during the project, there might still be residue on them that requires some elbow grease to remove. Also, look for dirt or other debris that settled on window sills or around window frames during construction.
4. Clean Walls
Use warm soapy water and a sponge or a soft washcloth to clean the walls, removing all dirt and dust. If there is paint on the walls, use an acrylic cleaner or degreaser. Don’t use any cleaners with ammonia, chlorine, or alcohol in them. They can react with latex paints and give off toxic fumes that could be dangerous if inhaled.
5. Get rid of Electrical Hazards.
After a post modeling cleanup, it’s also important to make sure that you don’t have any exposed wires or other hazards. Have an electrician inspect your wiring after replacing old wiring with new wiring, as well as after installing new lights or appliances in the home.
Consider Hiring a Professional Cleaning Service!
You’re probably exhausted after the huge project of remodeling your home. Dust, dirt, and debris are part of remodeling and it takes a lot of work to get rid of it all. But why not hire a professional cleaning service to take care of this for you? There is a lot of benefits in hiring post construction cleaning professionals.
Let’s face it, when you’re tired and busy, it can be easy to overlook certain spots during a cleaning session, even if you think you did a thorough job. With My Cleaning Angel, however, that won’t happen!
Deep cleaning after remodeling can be stressful, especially if you are trying to take care of it by yourself. You may not have the necessary cleaning tools or equipment to get the job done right. You can book cleaning services online, it’s easy and fast.
You’ll save money on deep cleaning supplies and equipment by hiring a professional service. If you try to handle this job yourself, you might spend hundreds of dollars on supplies like vacuums, mops, brooms, microfiber towels, and more. You may also need specialty products for tile or wood floors.
A professional cleaning service like My Cleaning Angel has the experience and expertise to do all of the dirty work for you, with appropriate tools and supplies!
Recent Comments